Time for amateur radio to catch up



Yaesu FT2DR

This is one of my favorite handhelds. I am partial to Yaesu, because it was also my first handheld. When I was originally licensed 17 years ago, I got an FT50. Since then I have owned a VX-6, and this.

The FT2D is Yaesu’s handheld foray into the world of digital modes. This handheld uses C4FM. It can connect directly to other handhelds, nodes, and repeaters using digital modes. It can transmit voice and data simultaneously. The people you are communicating with can know who they are talking to, where the person is, and even see what is going on (camera mic attachment).

As neat as all this is, I hope this radio is just a proof of concept. Here are the must have changes that need to happen in the next iteration of this radio.


Use a capacitive eInk touch screen that is the full size of the front face (minus the speaker). Get rid of all buttons on the front of the radio. Raise the resolution of the screen (800 x 450 minimum). That is a 16 x 9 ratio, yielding a 2 x 3.2 inch screen size. With capacitive touch, you can be wearing gloves and it will still respond. There are color eInk screens that refresh fast enough to show video. Use one.


Time to add 1.2 GHz. Why? Data speeds. This radio must be able to handle 256kbps data speeds to other radios, repeaters, and nodes. This can be done using C4FM and 128K baud transmission. Using this speed a 12 MP jpeg (average 5 MB) could move from one device to another in 20 to 30 seconds.


Add the computer to the handheld and make a SmartHT™. Use Android so that people can use the mountain of already available Android software. They can edit/resize photos, create/edit documents, log, track satellites… This would become the most common radio in the field during emergency exercises.

Get rid of everything on the right side of the radio and make it flat.


Starting at the bottom, the EXT DC IN must go. The USB 3.1 standard allows for 9 watts of power and data to use the same connector. Stop requiring connectors to do a single job. If it MUST be on the radio, make it do as much work as possible. Combine the data and DC power connector into a single connector, and put it on the bottom in the right corner.

Next one up, the MIC/SP connector. GET RID OF THIS. Have you NOT heard of bluetooth? Why are you requiring the use of cables in 2017? Make a MIC/Camera handheld device that is bluetooth based. Make the Mic rechargeable by having a micro USB connector on the bottom. This way it can use any phone charger, connect to a computer, connect to the port on the bottom right, etc. And while we’re talking about a camera, 12 MP. Period.

We’ve already talked about the Data connector.

Now we are down (up) to the microSD card slot. This is unnecessary. If the radio can connect through USB (which we’ve already addressed), make it so that the storage inside the radio is read like a drive on the computer that is connected. Then backup files, logs, and configurations can all be accessed directly. The software for configuring the device can read and write directly to the onboard memory. Since there is going to be a camera and applications, a minimum of 32GB of onboard storage is a must.

With all that gone we can now make the side flat so that someone can set the radio on its side and use it as a monitor (connecting a bluetooth keyboard). The power cable will not knock the radio over when connected. This makes the configuration field expedient and functional.

Drop in

The drop in charger should make contact with both power AND data. Keep the removable battery. We MUST be able to swap in the field. All in all this radio is a good first step. We need to catch up with tech to make the next handheld everything it can be. This recipe will not put amateur radio back out in front like it used to be, but it will make it so that we are in striking distance of cutting edge again.

AnyTone D868UV


img_0019I picked up an AnyTone D868UV dual-band transceiver to replace my single-band Tytera MD-390. I am happy with the purchase. I have decided to update the codeplug for this radio weekly. When I do that I will post the new codeplug, along with an explanation of what changed. I will update the user database every Friday morning. Feel free to come by, download, and update.

Keep in mind that my codeplug will be based in Colorado. If you find errors or omissions please leave a comment. I was planning to make videos about programming this device. It looks like WoodburyMan beat me to it:

  1. How to do a firmware update to your radio.
  2. How to do a user database import for your radio.
  3. How to do an initial setup on your radio.
  4. How to do your own codeplug setup on your radio.